Rebelcell Quick Connect Universal

Quick Connect Universal

Quick connection cable for your sonar with integrated fuse (3A/5A). For secure "1-click" connection between 12V Rebelcell battery and sonar.

3 x4mm2 connection cables:
A : ~ 40 cm long with XT60 connector and ANEN (red/black) PA-45 connector.
W : ~ 10 cm with XT60 and M8 tongue connection.
C : ~ 10 cm with X60 and Faston connector. (Connects to your equipment, cable B.)

Integrated 3A 'in-line' fuse + extra ANEN PA-45 connector for your equipment

The cable can be connected with one click to equipment for a secure connection.

Installation and use

1. Depending on the connectors on your battery, choose either cable B (with M8 connector) or C (with Faston connector) and connect to your battery. Then snap the other side into place via the XT60 connector to the corresponding XT60 connector on cable A.
2. Then the separate ANEN connector that needs to be connected to your depth sound. Crimp the silver contact points (use an AMP crimp tool for non-insulated cable connections) to the cables or your sonar. After crimping, the contact points must be inserted into the red (for +) or black (for -) connector until they click. The contact points are now secured and cannot be disconnected. Slide the red and black parts into place with the black sleeve and connect to the corresponding connector on the Quick Connect FF cable.
3. Only use sonar and other suitable 12V equipment with a maximum power draw of 10A (and use the appropriate built-in fuse, a 3A and 5A use is included.)